• Categories
    • Recent
    • Tags
    • Popular
    • Register
    • Login

    FOTA not working

    Scheduled Pinned Locked Moved Troubleshooting
    15 Posts 5 Posters 1.6k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jkandasaJ Offline
      jkandasa @Daniele
      last edited by

      @daniele can you increase MY_SMART_SLEEP_WAIT_DURATION_MS value something to 1000ms?

      #define MY_SMART_SLEEP_WAIT_DURATION_MS (1000ul)
      
      1 Reply Last reply Reply Quote 0
      • D Offline
        Daniele
        last edited by

        I tried, but without any luck.
        After the reboot command, the node log is a continuous flow of MySensors splash screen:

        3485 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=33,pt=5,l=4,sg=0,ft=0,st=OK:10000
        3495 TSF:MSG:SEND,50-50-0-0,s=2,c=1,t=0,pt=2,l=2,sg=0,ft=0,st=OK:21
        3502 MCO:SLP:MS=10000,SMS=1,I1=255,M1=255,I2=255,M2=255
        3510 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=32,pt=5,l=4,sg=0,ft=0,st=OK:1000
        3831 TSF:MSG:READ,0-0-50,s=255,c=3,t=13,pt=0,l=0,sg=0:
        3837 TSF:MSG:ACK REQ
        3842 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=13,pt=0,l=0,sg=0,ft=0,st=OK:
         
         __  __       ____
        |  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
        | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
        | |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
        |_|  |_|\__, |____/ \__⸮ 
         __  __       ____
        |  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
        | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
        | |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
        |_|  |_|\__, |____/ \__⸮ 
         __  __       ____
        |  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
        | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
        | |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
        |_|  |_|\__, |____/ \___ 
         __  __       ____```
        jkandasaJ 1 Reply Last reply Reply Quote 0
        • jkandasaJ Offline
          jkandasa @Daniele
          last edited by jkandasa

          @daniele Can you check, Have you burned MYSBootloader properly? Fuse settings are important.

          I had this reboot issue while ago with Pro mini default boot loader.

          1 Reply Last reply Reply Quote 0
          • D Offline
            Daniele
            last edited by

            I tried re-burning the bootloader, taking the dev branch this time.
            No I don't have the reboot issue, everything goes without any error, but the sketch is not updated.
            In the folder with generated files I have 2 hex files: one with the name of my sketch, and one with the same name + .with_bootloader, I used the first one in my tests, is this wrong?
            Could this be related to the 250kbps parameter I used?

            jkandasaJ 1 Reply Last reply Reply Quote 0
            • jkandasaJ Offline
              jkandasa @Daniele
              last edited by

              @daniele You should use the hex without bootloader,

              If you use burned bootloader from dev branch(hex file from GitHub), it should not work in your environment, since you are using non-default channels(MY_RF24_CHANNEL).

              I guess, 250kbps is a default MY_RF24_DATARATE

              • your settings, #define MY_RF24_CHANNEL 125
              • default settings, #define MY_RF24_CHANNEL (76)
              1 Reply Last reply Reply Quote 0
              • D Offline
                Daniele
                last edited by

                So I cannot use FOTA with a custom channel?
                Or should I use the master branch from GitHub?

                skywatchS A 2 Replies Last reply Reply Quote 0
                • skywatchS Offline
                  skywatch @Daniele
                  last edited by

                  @daniele @jkandasa

                  That seems crazy that you can select a clear channel to use but only can use default for fota. There must be a way to edit the hex file with an editor and save it for other channels?

                  Maybe worth asking that question directly on the mysensors pages?

                  G 1 Reply Last reply Reply Quote 1
                  • A Offline
                    aliasjim @Daniele
                    last edited by

                    @Daniele You need to compile the MYSbootloader for the right channel. You can get all kind of flavors here: https://github.com/guillebot/MYSensors-Bootloaders

                    1 Reply Last reply Reply Quote 0
                    • G Offline
                      guille @skywatch
                      last edited by

                      @skywatch You can use every channel!

                      Take a look:

                      https://github.com/guillebot/MYSensors-Bootloaders

                      I would be great some form of scanning or automation, but for the moment this will do.

                      skywatchS 1 Reply Last reply Reply Quote 0
                      • skywatchS Offline
                        skywatch @guille
                        last edited by

                        @guille That is a great resource, thanks.

                        My only comment would be that channels 111-125 are missing in the current version.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post

                        1

                        Online

                        598

                        Users

                        530

                        Topics

                        3.4k

                        Posts
                        Copyright © 2015-2025 MyController.org | Contributors | Localization