FOTA not working

jkandasa

@daniele It is important to enable Smart sleep enabled in your node settings. Otherwise, this node will be treated as a normal node.

MYSBootloader: we need to send Reboot command
Dualoptiboot: we need to send Upload firmware

Daniele

@jkandasa, I forgot to tell that I flagged "smartsleep" in the node page of mycontroller.
I tried sending reboot and also resetting the arduino, but still nothing changes.
BTW, any idea why it neither sends the firmware config when ack is enabled?

jkandasa

@daniele It should work, non-sleeping node firmware update works ok?

I never tested sleep node firmware, needs to check. How about other data for sleep node, working as expected?

Daniele

I tried reaplacing smartSleep with wait, but still nothing happens (and no errors in the log).
All other things are working as expected.

jkandasa

@daniele can you increase MY_SMART_SLEEP_WAIT_DURATION_MS value something to 1000ms?

#define MY_SMART_SLEEP_WAIT_DURATION_MS (1000ul)

Daniele

I tried, but without any luck.
After the reboot command, the node log is a continuous flow of MySensors splash screen:

3485 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=33,pt=5,l=4,sg=0,ft=0,st=OK:10000
3495 TSF:MSG:SEND,50-50-0-0,s=2,c=1,t=0,pt=2,l=2,sg=0,ft=0,st=OK:21
3502 MCO:SLP:MS=10000,SMS=1,I1=255,M1=255,I2=255,M2=255
3510 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=32,pt=5,l=4,sg=0,ft=0,st=OK:1000
3831 TSF:MSG:READ,0-0-50,s=255,c=3,t=13,pt=0,l=0,sg=0:
3837 TSF:MSG:ACK REQ
3842 TSF:MSG:SEND,50-50-0-0,s=255,c=3,t=13,pt=0,l=0,sg=0,ft=0,st=OK:
 
 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \__⸮ 
 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \__⸮ 
 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___ 
 __  __       ____```

jkandasa

@daniele Can you check, Have you burned MYSBootloader properly? Fuse settings are important.

I had this reboot issue while ago with Pro mini default boot loader.

Daniele

I tried re-burning the bootloader, taking the dev branch this time.
No I don't have the reboot issue, everything goes without any error, but the sketch is not updated.
In the folder with generated files I have 2 hex files: one with the name of my sketch, and one with the same name + .with_bootloader, I used the first one in my tests, is this wrong?
Could this be related to the 250kbps parameter I used?

jkandasa

@daniele You should use the hex without bootloader,

If you use burned bootloader from dev branch(hex file from GitHub), it should not work in your environment, since you are using non-default channels(MY_RF24_CHANNEL).

I guess, 250kbps is a default MY_RF24_DATARATE

your settings, #define MY_RF24_CHANNEL 125
default settings, #define MY_RF24_CHANNEL (76)

Daniele

So I cannot use FOTA with a custom channel?
Or should I use the master branch from GitHub?

skywatch

@daniele @jkandasa

That seems crazy that you can select a clear channel to use but only can use default for fota. There must be a way to edit the hex file with an editor and save it for other channels?

Maybe worth asking that question directly on the mysensors pages?

aliasjim

@Daniele You need to compile the MYSbootloader for the right channel. You can get all kind of flavors here: https://github.com/guillebot/MYSensors-Bootloaders

guille

@skywatch You can use every channel!

Take a look:

https://github.com/guillebot/MYSensors-Bootloaders

I would be great some form of scanning or automation, but for the moment this will do.

skywatch

@guille That is a great resource, thanks.

My only comment would be that channels 111-125 are missing in the current version.

FOTA not working

1

598

530

3.4k