MyController 1.2.0.Final version released

jkandasa

Download page
Release notes
Kindly report issues on GitHub issues page
If you have question post it on this forum

Tag

:thumbs_up: running the final version now, the serial gateway restart code works fine now!!, it is possible to disable/enable the gateway without any issues.. Thanks!!

gouds

Hi jkandasa,
The new build looks good. I have a small problem with the Sensor Names resetting to all the same name. '1.0' I found this was the case when updating to the new 1.2 final. I went through and updated all the sensor names and came back an hour or so later and all the sensor names had changed cack to txt '1.0'.

Any ideas on why this would happen. Something new in the update?

Thanks

jkandasa

@gouds Can you post one of your sketch(where sensor name changes) code?

skywatch

I get sensor names changing on 1.3.0 as well. Haven't yet found why, but seems to happen after a node is rebooted.

I just caught two after a node move.....

Node name "intensity" changed to ...
Node name "30238064 TSF:MSG:READ,15-15-0,s=2,c=0,t=23,pt=0,l=0,sg=0:"

Very strange - I am sure that @Jkandasa will find an answer to this.

Tag

@skywatch

Hi there!!
Have you seen this, I posted it approx 2 weeks ago

https://forum.mycontroller.org/topic/302/1-3-0-snapshot-losing-sensor-names/11

1.3.0 takes the names configured in the presentation oart of the sketch....

skywatch

Opps - no I missed your post - sorry!

But I tried it and it works (and saves a little time setting up the node sensors in myc)

THank you for this information - a lot of people can benefit from this knowledge.

Tag

@skywatch

Good!! :thumbs_up:

skywatch

@Tag

Seems it almost solved the issue, but a sensor using 'custom' and 'variable1' still can exhibit this behaviour. But things have hopefully improved after some effort this week.

skywatch

I replaced custom and var1 with S_DUST and V_LEVEL. but still the same issue.

The node has 2 sensors, both send name with presentation. Only one name shows, the other never seems to work, not as custom or dust.

Hmmmmm........

jkandasa

@skywatch can you post your sketch?

skywatch

Of course I can.... here it is.....;)

// Enable debug prints to serial monitor
#define MY_DEBUG

// Enable and select radio type attached
#define MY_RADIO_NRF24
#define MY_RF24_PA_LEVEL   RF24_PA_HIGH
#define MY_NODE_ID 15
#define MY_RF24_CHANNEL (97)
//#define MY_REPEATER_FEATURE
//#define MY_SIGNING_ATSHA204
//#define MY_SIGNING_REQUEST_SIGNATURES 
#include <Wire.h>
#include <MySensors.h>
#include <AS3935.h> // AS3935 MOD-1016 by Embedded Adventures

volatile bool detected = false;

//-----------------IMPORTANT--------------------
//---------------CHANGE SETTINGS HERE-----------
#define IRQ_pin 2

#define AS3935_TUNE_CAPS     5 // <-- SET THIS VALUE TO THE NUMBER LISTED ON YOUR BOARD 
#define AS3935_INDOORS       1 // AS3935_INDOORS=1 indoors, AS3935_INDOORS=0 outdoors
#define AS3935_NOISE_FLOOR   6
#define AS3935_ENABLE_DISTURBERS 1 // 0 or 1      

#define CHILD_ID_DISTANCE 1
#define CHILD_ID_INTENSITY 2
MyMessage msgDist(CHILD_ID_DISTANCE, V_DISTANCE);
MyMessage msgInt(CHILD_ID_INTENSITY, S_DUST);
unsigned long heartbeat_time = 60000*10; //every 10 mins.
unsigned long last_heartbeat_time = 0;

void setup()
{
  Serial.begin(115200);
  while (!Serial) {}
  Serial.println("MOD-1016 (AS3935) Lightning Sensor");
  Serial.println("beginning boot procedure....");

  Wire.begin();
  mod1016.init(IRQ_pin);

  //-----------------IMPORTANT--------------------
  //---------------CHANGE SETTINGS HERE-----------
  //Tune Caps, Set AFE, Set Noise Floor
  //autoTuneCaps(IRQ_pin);
  mod1016.setTuneCaps(AS3935_TUNE_CAPS);
  wait(2);
#if AS3935_INDOORS == 1
  mod1016.setIndoors();
#else
  mod1016.setOutdoors();
#endif
  wait(2);
  mod1016.setNoiseFloor(AS3935_NOISE_FLOOR);
  wait(2);
#if AS3935_ENABLE_DISTURBERS == 1
  mod1016.enableDisturbers();
#else
  mod1016.disableDisturbers();
#endif
  //mod1016.calibrateRCO();
  wait(2);
  Serial.println("TUNE\tIN/OUT\tNOISEFLOOR");
  Serial.print(mod1016.getTuneCaps(), HEX);
  Serial.print("\t");
  Serial.print(mod1016.getAFE(), BIN);
  Serial.print("\t");
  Serial.println(mod1016.getNoiseFloor(), HEX);
  Serial.print("\n");

  pinMode(IRQ_pin, INPUT);
  attachInterrupt(digitalPinToInterrupt(IRQ_pin), alert, RISING);
  Serial.println("after interrupt");
  // delay execution to allow chip to stabilize.
  wait(1000);

}

void presentation()  {
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("Lightning2 MOD-1016", "0.3");

  // Register all sensors to gw (they will be created as child devices)
  present(CHILD_ID_DISTANCE, S_DISTANCE, "Distance");
  wait(100);
  present(CHILD_ID_INTENSITY, V_LEVEL), "Intensity";
}

void loop() {
  if (detected) {
    translateIRQ(mod1016.getIRQ());
    detected = false;
  }
  // Send heartbeat 
    if ((millis() - last_heartbeat_time) > heartbeat_time) {
    sendHeartbeat();
    last_heartbeat_time = millis();
  }
}

void alert() {
  detected = true;
}

void translateIRQ(uns8 irq) {
  switch (irq) {
    case 1:
      Serial.println("Noise detected");
      break;
    case 4:
      Serial.println("Disturber detected");
      break;
    case 8:
      Serial.println("Lightning detected!");
      printandsendToGW();
      break;

  }
}

void printandsendToGW() {
  int distance = mod1016.calculateDistance();
  unsigned int lightning_intensity = mod1016.getIntensity();
  if (distance == -1)
    Serial.println("Lightning out of range");
  else if (distance == 1)
    Serial.println("Distance not in table");
  else if (distance == 0)
    Serial.println("Lightning overhead");
  else {
    Serial.print("Lightning ~");
    Serial.print(distance);
    Serial.println("km away\n");
    Serial.print("Lightning Intensity: ");
    Serial.println(lightning_intensity);
    send(msgDist.set(distance));
    send(msgInt.set(lightning_intensity));
  }
}

I hope you can see if I went wrong somewhere! But I have checked it and one works (distance) and one does not (intensity).

skywatch

Ah, I see it ... missing bracket (well in the wrong place anyway) - will retry this now! - sorry for confusion.

Update - of course it works when you do it right! Problem solved!

skywatch

But after testing this suddenly all nodes showed as down!!!!

A reboot of the pi didn't solve it, only a full poweroff and then power on again a few minutes later did the trick.

Below is what is in the myslog for this event...

[Wed Jul 18 17:07:10 BST 2018] IO error: java.net.SocketException: Connection reset in processing a request from /192.168.1.6:8443 / sun.security.ssl.SSLSocketImpl
[Wed Jul 18 17:07:11 BST 2018] IO error: java.net.SocketException: Connection reset in processing a request from /192.168.1.6:8443 / sun.security.ssl.SSLSocketImpl
[Wed Jul 18 17:07:12 BST 2018] IO error: java.net.SocketException: Connection reset in processing a request from /192.168.1.6:8443 / sun.security.ssl.SSLSocketImpl
[Wed Jul 18 17:07:18 BST 2018] IO error: java.net.SocketException: Connection reset in processing a request from /192.168.1.6:8443 / sun.security.ssl.SSLSocketImpl
[Wed Jul 18 17:07:18 BST 2018] IO error: java.net.SocketException: Connection reset in processing a request from /192.168.1.6:8443 / sun.security.ssl.SSLSocketImpl
[Wed Jul 18 19:20:43 BST 2018] Accept: java.net.SocketException: Socket closed
2018-07-18 19:20:46,412 INFO [MyController.org Shutdown-Hook] [org.mycontroller.standalone.mqttbroker.MoquetteMqttBroker:72] MQTT Broker has been stopped successfully
2018-07-18 19:20:46,617 INFO [MyController.org Shutdown-Hook] [org.mycontroller.standalone.AppShutdownHook:36] Bye, Have a nice day! See you soon
2018-07-18 19:20:54,022 INFO [main] [org.mycontroller.standalone.db.DataBaseUtils:117] Checking migration...
2018-07-18 19:21:00,881 INFO [main] [org.mycontroller.standalone.db.DataBaseUtils:168] Application information: [Version:1.3.0-SNAPSHOT, Database(type:H2 database embedded, version:1.4.194 (2017-03-10), schema version:1.04.01 - 2017 Oct 25), Built on:2018-05-04T09:09:24+0530, Git commit:d111efac6d9ee68aaf862ff8de5c4b677534e16f:development]
2018-07-18 19:21:02,122 WARN [main] [io.moquette.persistence.mapdb.MapDBPersistentStore:78] Using fresh MapDB store file. Path=../conf/persistent_stores/moquette/moquette_store.mapdb
2018-07-18 19:21:02,876 WARN [main] [io.moquette.server.Server:186] Using default SSL context creator
2018-07-18 19:21:03,488 WARN [main] [io.netty.bootstrap.ServerBootstrap:146] Unknown channel option 'TCP_NODELAY' for channel '[id: 0x763c35ee]'
2018-07-18 19:21:03,594 WARN [main] [io.netty.bootstrap.ServerBootstrap:146] Unknown channel option 'TCP_NODELAY' for channel '[id: 0xe7f26a36]'
2018-07-18 19:21:03,602 INFO [main] [org.mycontroller.standalone.mqttbroker.MoquetteMqttBroker:54] MQTT Broker started successfully. MqttBrokerSettings(enabled=true, sslEnabled=false, bindAddress=0.0.0.0, mqttPort=1883, mqttsPort=8883, websocketPort=7080, allowAnonymous=true, enabledOnBackend=true, sslKeystoreFile=null)
2018-07-18 19:21:04,412 INFO [mc-th-pool-1] [org.mycontroller.standalone.gateway.mqtt.MQTTDriver:86] MQTT Gateway[name:Raspberry Pi, URI:tcp://localhost:1883, NetworkType:MyController] connected successfully..
2018-07-18 19:21:07,664 INFO [main] [org.mycontroller.standalone.StartApp:215] TJWS server started successfully, HTTPS Enabled?:true, HTTP(S) Port: [8443]
2018-07-18 19:21:07,665 INFO [main] [org.mycontroller.standalone.StartApp:113] MyController.org server started in [14250] ms
[Wed Jul 18 19:31:59 BST 2018] Accept: java.net.SocketException: Socket closed
2018-07-18 19:32:02,160 INFO [MyController.org Shutdown-Hook] [org.mycontroller.standalone.mqttbroker.MoquetteMqttBroker:72] MQTT Broker has been stopped successfully
2018-07-18 19:32:02,660 INFO [MyController.org Shutdown-Hook] [org.mycontroller.standalone.AppShutdownHook:36] Bye, Have a nice day! See you soon
2018-07-18 19:32:09,898 INFO [main] [org.mycontroller.standalone.db.DataBaseUtils:117] Checking migration...
2018-07-18 19:32:16,897 INFO [main] [org.mycontroller.standalone.db.DataBaseUtils:168] Application information: [Version:1.3.0-SNAPSHOT, Database(type:H2 database embedded, version:1.4.194 (2017-03-10), schema version:1.04.01 - 2017 Oct 25), Built on:2018-05-04T09:09:24+0530, Git commit:d111efac6d9ee68aaf862ff8de5c4b677534e16f:development]
2018-07-18 19:32:18,139 WARN [main] [io.moquette.persistence.mapdb.MapDBPersistentStore:78] Using fresh MapDB store file. Path=../conf/persistent_stores/moquette/moquette_store.mapdb
2018-07-18 19:32:18,878 WARN [main] [io.moquette.server.Server:186] Using default SSL context creator
2018-07-18 19:32:19,500 WARN [main] [io.netty.bootstrap.ServerBootstrap:146] Unknown channel option 'TCP_NODELAY' for channel '[id: 0x2f64c36d]'
2018-07-18 19:32:19,591 WARN [main] [io.netty.bootstrap.ServerBootstrap:146] Unknown channel option 'TCP_NODELAY' for channel '[id: 0xa33f8004]'
2018-07-18 19:32:19,595 INFO [main] [org.mycontroller.standalone.mqttbroker.MoquetteMqttBroker:54] MQTT Broker started successfully. MqttBrokerSettings(enabled=true, sslEnabled=false, bindAddress=0.0.0.0, mqttPort=1883, mqttsPort=8883, websocketPort=7080, allowAnonymous=true, enabledOnBackend=true, sslKeystoreFile=null)
2018-07-18 19:32:20,388 INFO [mc-th-pool-1] [org.mycontroller.standalone.gateway.mqtt.MQTTDriver:86] MQTT Gateway[name:Raspberry Pi, URI:tcp://localhost:1883, NetworkType:MyController] connected successfully..
2018-07-18 19:32:23,567 INFO [main] [org.mycontroller.standalone.StartApp:215] TJWS server started successfully, HTTPS Enabled?:true, HTTP(S) Port: [8443]
2018-07-18 19:32:23,569 INFO [main] [org.mycontroller.standalone.StartApp:113] MyController.org server started in [14111] ms
2018-07-18 19:33:40,533 ERROR [Thread-8] [org.mycontroller.standalone.gateway.serial.SerialDataListenerjSerialComm:176] Exception, 
java.lang.NumberFormatException: For input string: "0```

jkandasa

@skywatch I hope you might have some issue with your serial gateway. Next time when you face this issue, can you unplug your serial gateway and plug it again to check the status?

jkandasa

@skywatch This morning I have fixed an issue with a serial port. Can you test again with SNAPSHOT version?

https://github.com/mycontroller-org/mycontroller/commit/c44c84061a64eb93bd98ea329cc3acc6bd93f107

skywatch

@jkandasa

Latest snapshot installed and testing.......Thank you!

Will see how it goes this week, I'll let you know the results but it all seems to be happy so far........

jkandasa

@skywatch Great! let's see for some time.

skywatch

Hmmmmm....something is not right, see log below.....

Argh, can't post the log in code tags or plain text, will email it to you....

It seems to be the strange characters in the log that prevent it from being copied and pasted, so sent you a screenshot instead.

MyController 1.2.0.Final version released

0

587

529

3.4k