@jkandasa The weirdest thing.

I added that function with a call at every loop and it makes a new unexistent sensor at the node:

SENSOR_BC HVAC flow (?)

And still won't send the parent EUI.

Don't worry! Is not that important. All works fine. It is my small peeve trying to know my topology.

Thanks!

Works great! Thanks

@guille One thing that took me a while to learn, when in the future you want to upgrade the firmware, there is no need to create a new version. Just edit the same firmware, upload the new .hex, and it will detect that it is new.

@guille Solved! It worked with 2 seconds.

Thanks a lot.

@aliasjim

1. You can add versions, like "1.0", and type "whatever node type you like".

2. Then add firmware. Upload your .hex

3. On the specific node, go to EDIT and assign this firmware.

4. Reboot. By hand or by command.

If you use MQTT you can watch as the new fw is uploading.

@aliasjim That's great!

Just for the record, I compiled all the bootloaders here:

https://github.com/guillebot/MYSensors-Bootloaders

all the channels, for 1, 8 and 16MHz.