• Categories
    • Recent
    • Tags
    • Popular
    • Register
    • Login

    SSD filled overnight

    General Discussion
    2
    5
    36
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      wint0178
      last edited by

      I just got MC server running yesterday on a RPi 4 (4GB) with 32 GB drive. I'm not sure what settings could have caused this, but I've got to imagine I need to make some changes to the types of data that are stored or the frequency. Any insights would be appreciated. Thanks!

      W 1 Reply Last reply Reply Quote 0
      • W
        wint0178 @wint0178
        last edited by

        @wint0178 I'm not sure what's going on, but I decided to stop the docker apps and then restart the Pi, it is stuck on a black screen with a single horizontal text cursor blinking in the upper left corner. I removed the ssd and thought I would try to clone it onto a larger ssd, but when I looked at the drive there is plenty of space, well over 10 GB on the 32 GB drive. Yet, when I checked the drive in file manager it said there was no space. Additionally, I got a warning from Google drive on the web browser that some features were not available due to lack of memory AND from Arduino IDE when I tried to compile a sketch, it said there was no space. It seems as though there is a very small partition on the drive that is set too small, but file manager was able to view it as a 32 GB drive. Any ideas?

        I am still hoping to simply clone to a 64 GB drive, but don't have the time before I leave for a family road trip.

        jkandasaJ 1 Reply Last reply Reply Quote 0
        • jkandasaJ
          jkandasa @wint0178
          last edited by

          @wint0178 I have not experienced this kind of issue. check the filesystem. you can find the root cause. Please let us know your findings. You can check this after your family road trip 🙂

          W 1 Reply Last reply Reply Quote 0
          • W
            wint0178 @jkandasa
            last edited by

            @jkandasa I'm still not sure what happened. In the end, I decided to reformat the drive and start from scratch. I needed to write out some concise instructions for installing all of the software anyway and this was the right time to take care of that. Anyway, I have it installed again and running on the same drive with DDNS on my home router. I have port 8080 being forwarded to the http for my DDNS. I will monitor to see if something like this happens again, but this time I used the built-in SD Card Copier to make a copy of the drive after installing the server, maybe this will be a viable backup.

            jkandasaJ 1 Reply Last reply Reply Quote 0
            • jkandasaJ
              jkandasa @wint0178
              last edited by

              @wint0178 You can use letsencrypt certification setup with https_acme to your DDNS setup, https://v2.mycontroller.org/docs/installation/advanced-installation/backend-configuration/

              1 Reply Last reply Reply Quote 0
              • First post
                Last post

              0

              Online

              650

              Users

              522

              Topics

              3.4k

              Posts
              Copyright © 2015-2023 MyController.org | Contributors | Localization