Setpoint for a Temperature

jkandasa

@JeeLet here is the yaml file to control from MyController
on your sketch receive function process, a sensorId with 1 and V_STATUS variable. control your relay with the received payload

customVariableType: none
id: control_relay
enabled: true
type: simple
spec:
  frequency: daily
  dayOfWeek: sun,mon,tue,wed,thu,fri,sat
  date: ''
  dayOfMonth: ''
  time: '20:51'
validity: {}
handlerParameters:
  turn_on: >-
    {"type":"resource_by_quick_id","disabled":"","data":"cmVzb3VyY2VUeXBlOiBmaWVsZApxdWlja0lkOiBHVzI1NjAuMjIuMS5WX1NUQVRVUwpwYXlsb2FkOiAnb24nCnByZURlbGF5OiAwcwo="}
  turn_off: >-
    {"type":"resource_by_quick_id","disabled":"","data":"cmVzb3VyY2VUeXBlOiBmaWVsZApxdWlja0lkOiBHVzI1NjAuMjIuMS5WX1NUQVRVUwpwYXlsb2FkOiAnb2ZmJwpwcmVEZWxheTogMWgK"}
handlers:
  - resource_handler

You can move all your schedule logic to your sketch. As mentioned here you have to use custom variable to submit your inputs.

JeeLet

Hello jkandasa

Thank you for the information, I will test it in practice .

yes I am often absent from the world of micro i,informatique at the moment

JeeLet

in the topic https://forum.mysensors.org/topic/4970/setting-parameters-in-nodes/12
there is an interesting information

"..... This way you can see what openhab is sending to your MySensors gateway. Here is how to do it
Open an ssh connection to your openhab server
Type ssh -p 8101 openhab@localhost. ......."

the same thing is possible with MyController ???

read in real time the MyC and MyS dialog and the Log

jkandasa

@JeeLet you can watch it in MyController,
on your gateway setup enable message logger as follows,

On the computer where MyController is running, got to MyController directory, you can see a logs directory. there is file will be named as your gateway name, tail it

logs/
└── gateway_logs
    ├── gw_mysensor.log

tail -f logs/gateway_logs/gw_mysensor.log

2022-06-03T14:43:04.941+0530	Recd	out_rfm69/31/4/1/0/24			917730
2022-06-03T14:43:05.579+0530	Recd	out_rfm69/31/5/1/0/24			989894
2022-06-03T14:43:06.008+0530	Recd	out_rfm69/31/6/1/0/24			998194
2022-06-03T14:43:06.494+0530	Recd	out_rfm69/1/1/1/0/25			72
2022-06-03T14:43:06.665+0530	Recd	out_rfm69/31/4/1/0/25			512
2022-06-03T14:43:06.816+0530	Recd	out_rfm69/1/1/1/0/35			65.00
2022-06-03T14:43:07.389+0530	Recd	out_rfm69/31/4/1/0/37			49.94
2022-06-03T14:43:07.740+0530	Recd	out_rfm69/31/5/1/0/37			49.94
2022-06-03T14:43:08.419+0530	Recd	out_rfm69/31/6/1/0/37			32.00
2022-06-03T14:43:09.129+0530	Recd	out_rfm69/31/4/1/0/26			1
2022-06-03T14:43:11.066+0530	Recd	out_rfm69/13/1/1/0/38			244.01
2022-06-03T14:43:11.485+0530	Recd	out_rfm69/13/1/1/0/39			0.00
2022-06-03T14:43:12.026+0530	Sent	in_rfm69/13/1/1/1/35			65
2022-06-03T14:43:12.872+0530	Recd	out_rfm69/13/1/1/1/35			65
2022-06-03T14:43:13.635+0530	Recd	out_rfm69/13/255/3/0/1			
2022-06-03T14:43:13.660+0530	Sent	in_rfm69/13/255/3/1/1			1654267393
2022-06-03T14:43:14.463+0530	Recd	out_rfm69/13/255/3/1/1			1654267393

JeeLet

xxxi@odroidc2:/opt/apps/mycontroller$ tail -f executable/mc_home/logs/gateway_logs/gw_GW2560.log
2022-06-03T12:10:23.225+0200	recd	0;12;1;0;0;0.0
2022-06-03T12:10:23.225+0200	recd	0;13;1;0;1;0.0
2022-06-03T12:10:43.728+0200	recd	0;255;3;0;9;620470 .

JeeLet

Hello
here is my sketch is clean and functional.
the values sent with the bodyboard work well.

one step finished

now i tried with the examples of the schedules you gave me, and well i'm lost

I recapitulate the need.

MyC sends at a certain time or day, the value of on and off
for the time slots of the relay on the clock.

integer values without comma,
example : 1630 for 16hours 30minutes.
the sketch of MyS manages with

Thanks for your help.
many stars in the sky for you

the recopies and other info

text alternatif

the parts of the sketch

...
// ------ objet - MyS numero du Node ------
  #define CHILD_ID_2 2      //On time
  #define CHILD_ID_4 4      //Off time
 ...
//----------- test commande Relay ----------------    
    int ledPin = 7;               // test Assigned Pin for Relay Module
   
     int requestOn;
   int requestOff;

//----- MyS ------
   MyMessage dimmerMsg(CHILD_ID_2, V_PERCENTAGE);  //hour walk
   MyMessage dimmerMsg4(CHILD_ID_4, V_PERCENTAGE);  //stop time
   
   bool info;              //  for your information GW sur MyC

//---------------- SETUP ----------------------------

  void setup()  {  

...
//---- test set point -----
  send(dimmerMsg.set(info)); 
  send(dimmerMsg4.set(info));
  }

//--------------MySensors-------------

  void presentation()  {
  
   sendSketchInfo("Clock", "2.0"); 
   present( CHILD_ID_2, S_DIMMER, "Debut" ); // Register the LED Dimmable Light with the gateway
   present( CHILD_ID_4, S_DIMMER, "Fin" );
      
    }

//------------------ LOOP -----------------------
  void loop() {     
  
 ....        
//----- commande Relay dans une plage horaire  -----
timecurrent =  hour()*100 + minute();   // Conversion des heure en minutes
 
//----- reception set time On Off ------------ 
 int requestedLevel = atoi( message.data ); //Récupérer la valeur à partir du message 
      
//----- limite valeur entrant dans la plage valide 0 to 2400 ------
    requestedLevel = requestedLevel > 2400 ? 2400 : requestedLevel;
    requestedLevel = requestedLevel < 0   ? 0   : requestedLevel;
    
     if((requestedLevel % 100) > 59) { requestedLevel = 00; }
     
//----- trie des messages -------
  switch (message.sensor) {
    case 2:                          // message  1
      requestOn = requestedLevel;       
    break;
   
    case 4:                       // message  2
      requestOff = requestedLevel;
    break;       
   }   

//----- commande Relay dans une plage horaire  -----   
   if (timecurrent >= requestOn && timecurrent <= requestOff)  { 
      digitalWrite(ledPin, HIGH); }
  else {
      digitalWrite(ledPin, LOW);  }


//----- return value for MyC -------
    send( dimmerMsg.set(requestOn) );
    send( dimmerMsg4.set(requestOff) );
    
    }
  }

jkandasa

@JeeLet good to know that you achieved your requirement. thanks for sharing the final result

JeeLet

text alternatif

No, the commands through the Schedules are not sent.

I waited for the night, but nothing happens on the Arduino.

Sending with widgets is fine

jkandasa

Hi @JeeLet for your schedule variables are not required and in Parameters to handler select Resource By Quick ID and add your payload.

But you are controlling time based action on your arduino sketch, but still why do you want to send the config payload from MyController schedule?

In your case controlling the V_STATUS (led or relay) directly, then you can use MyController Scheduler, otherwise you can go with your arduino sketch schedule

JeeLet

hello jkandasa

"...but why do you want to send the configuration payload from the MyController calendar?" for each Node to be autonomous, the principle of distributed intelligence, no centralization, the MyC Controller can be turned off or the link cut (and also to test MyC )

"otherwise you can use your arduino sketch program" ... Yes
MyC sends a time setting for the drift of the Arduino and also the management of time slots.
(afterwards the Gateways will have a RTC clock)

Thanks

Parameters to handler select Resource By Quick ID and add your payload.

Setpoint for a Temperature

0

587

529

3.4k