MySensor auto node ID

benya · 7 Feb 2017, 20:43

Tried.
Still cannot register with gateway and controller.

jkandasa · 8 Feb 2017, 05:32

@benya can you post your sketch?

benya · 8 Feb 2017, 11:03

@jkandasa said:

@benya can you post your sketch?

See https://github.com/QnuVGXic3n9H/HomeAutomation/blob/master/Arduino/MotionSensor/MotionSensor.ino

benya · 16 Feb 2017, 14:12

@benya said:

@jkandasa said:

@benya can you post your sketch?

See https://github.com/QnuVGXic3n9H/HomeAutomation/blob/master/Arduino/MotionSensor/MotionSensor.ino

Did you find any issues in my code?

jkandasa · 17 Feb 2017, 04:28

@benya I do not see any fault on your code. Can you check does your sketch already holds some id? Try to erase EEPROM and try again.

benya · 19 Feb 2017, 07:09

@jkandasa said:

@benya I do not see any fault on your code. Can you check does your sketch already holds some id? Try to erase EEPROM and try again.

I cleared EEPROM and used bare minimum sketch:

#define MY_RADIO_NRF24
#define MY_BAUD_RATE 38400
#define MY_DEBUG

#include <MySensors.h>
#include <SPI.h>

#define SENSOR_ID 1

#define OPEN 1
#define CLOSE 0

MyMessage msg(SENSOR_ID, V_TRIPPED);

uint8_t value = OPEN;

void presentation()
{
    present(SENSOR_ID, S_DOOR);
}

void loop()
{
    value = value == OPEN ? CLOSE : OPEN;
    send(msg.set(value));
    sleep(10000);
}

and node still fails to register:

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
10 TSM:INIT
12 TSF:WUR:MS=0
22 TSM:INIT:TSP OK
28 !TSF:SID:FAIL,ID=0
34 TSM:FAIL:CNT=1
38 TSM:FAIL:PDT
10045 TSM:FAIL:RE-INIT
10051 TSM:INIT
10061 TSM:INIT:TSP OK
10067 !TSF:SID:FAIL,ID=0
10074 TSM:FAIL:CNT=2
10080 TSM:FAIL:PDT
20086 TSM:FAIL:RE-INIT

benya · 19 Feb 2017, 07:13

As soon as I set specific NODE_ID:

#define MY_NODE_ID 1

node is able to connect:

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
10 TSM:INIT
12 TSF:WUR:MS=0
22 TSM:INIT:TSP OK
28 TSM:INIT:STATID=1
36 TSF:SID:OK,ID=1
43 TSM:FPAR
79 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
292 TSF:MSG:READ,0-0-1,s=255,c=3,t=8,pt=1,l=1,sg=0:0
307 TSF:MSG:FPAR OK,ID=0,D=1
2101 TSM:FPAR:OK
2105 TSM:ID
2109 TSM:ID:OK
2113 TSM:UPL
2117 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
2136 TSF:MSG:READ,0-0-1,s=255,c=3,t=25,pt=1,l=1,sg=0:1
2150 TSF:MSG:PONG RECV,HP=1
2158 TSM:UPL:OK
2162 TSM:READY:ID=1,PAR=0,DIS=1
2207 !TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=NACK:0100
4229 TSF:MSG:SEND,1-1-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=1,st=OK:2.1.1
4251 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
6268 TSF:MSG:SEND,1-1-0-0,s=1,c=0,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
6287 MCO:REG:REQ
6326 !TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=NACK:2
7239 TSF:MSG:READ,0-0-1,s=255,c=3,t=6,pt=0,l=6,sg=0:Metric
8382 !TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=1,st=NACK:2
10401 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=2,st=OK:2
10420 TSF:MSG:READ,0-0-1,s=255,c=3,t=27,pt=1,l=1,sg=0:1
10436 MCO:PIM:NODE REG=1
10442 MCO:BGN:INIT OK,TSP=1
10452 TSF:MSG:SEND,1-1-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:0
10471 MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
10485 MCO:SLP:TPD
10491 MCO:SLP:WUP=-1

jkandasa · 20 Feb 2017, 07:36

@benya Does your radio receives Rx pocket from gateway? Can you check gateway debug log?

benya · 20 Feb 2017, 08:34

@jkandasa
How could I check?
I posted logs already.

jkandasa · 20 Feb 2017, 09:37

@benya Enable debug message on gateway node, and capture log message

benya · 20 Feb 2017, 20:34

@jkandasa
Gateway log when node uses MY_NODE_ID=AUTO:

mysgw: Starting gateway...
mysgw: Protocol version - 2.2.0-beta
mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.2.0-beta
mysgw: TSF:LRT:OK
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: TSM:INIT:TSP OK
mysgw: TSM:INIT:GW MODE
mysgw: TSM:READY:ID=0,PAR=0,DIS=0
mysgw: MCO:REG:NOT NEEDED
mysgw: MCO:BGN:STP
mysgw: MCO:BGN:INIT OK,TSP=1

Node's log:

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
10 TSM:INIT
12 TSF:WUR:MS=0
22 TSM:INIT:TSP OK
28 !TSF:SID:FAIL,ID=0
34 TSM:FAIL:CNT=1
38 TSM:FAIL:PDT
10045 TSM:FAIL:RE-INIT
10051 TSM:INIT
10061 TSM:INIT:TSP OK
10067 !TSF:SID:FAIL,ID=0
10074 TSM:FAIL:CNT=2
10080 TSM:FAIL:PDT
20086 TSM:FAIL:RE-INIT
20092 TSM:INIT
20103 TSM:INIT:TSP OK
20109 !TSF:SID:FAIL,ID=0
20115 TSM:FAIL:CNT=3
20121 TSM:FAIL:PDT

Gateway log when node uses MY_NODE_ID=1:

mysgw: Starting gateway...
mysgw: Protocol version - 2.2.0-beta
mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.2.0-beta
mysgw: TSF:LRT:OK
mysgw: TSM:INIT
mysgw: TSF:WUR:MS=0
mysgw: TSM:INIT:TSP OK
mysgw: TSM:INIT:GW MODE
mysgw: TSM:READY:ID=0,PAR=0,DIS=0
mysgw: MCO:REG:NOT NEEDED
mysgw: MCO:BGN:STP
mysgw: MCO:BGN:INIT OK,TSP=1
mysgw: TSF:MSG:READ,1-1-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
mysgw: TSF:MSG:BC
mysgw: TSF:MSG:FPAR REQ,ID=1
mysgw: TSF:PNG:SEND,TO=0
mysgw: TSF:CKU:OK
mysgw: TSF:MSG:GWL OK
mysgw: TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0
mysgw: TSF:MSG:READ,1-1-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1
mysgw: TSF:MSG:PINGED,ID=1,HP=1
mysgw: TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=OK:1
mysgw: TSF:MSG:READ,1-1-0,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
mysgw: TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
mysgw: TSF:MSG:READ,1-1-0,s=255,c=0,t=17,pt=0,l=5,sg=0:2.1.1
mysgw: TSF:MSG:READ,1-1-0,s=255,c=3,t=6,pt=1,l=1,sg=0:0
mysgw: TSF:MSG:READ,1-1-0,s=1,c=0,t=0,pt=0,l=0,sg=0:
mysgw: TSF:MSG:READ,1-1-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2
mysgw: !TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=27,pt=1,l=1,sg=0,ft=0,st=NACK:1
mysgw: TSF:MSG:READ,1-1-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2
mysgw: TSF:MSG:SEND,0-0-1-1,s=255,c=3,t=27,pt=1,l=1,sg=0,ft=0,st=OK:1
mysgw: TSF:MSG:READ,1-1-0,s=1,c=1,t=16,pt=1,l=1,sg=0:0
mysgw: TSF:MSG:READ,1-1-0,s=1,c=1,t=16,pt=1,l=1,sg=0:1

Node log:

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
10 TSM:INIT
12 TSF:WUR:MS=0
22 TSM:INIT:TSP OK
28 TSM:INIT:STATID=1
36 TSF:SID:OK,ID=1
43 TSM:FPAR
79 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
354 TSF:MSG:READ,0-0-1,s=255,c=3,t=8,pt=1,l=1,sg=0:0
368 TSF:MSG:FPAR OK,ID=0,D=1
2101 TSM:FPAR:OK
2105 TSM:ID
2109 TSM:ID:OK
2113 TSM:UPL
2117 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
2136 TSF:MSG:READ,0-0-1,s=255,c=3,t=25,pt=1,l=1,sg=0:1
2150 TSF:MSG:PONG RECV,HP=1
2158 TSM:UPL:OK
2162 TSM:READY:ID=1,PAR=0,DIS=1
2207 !TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=NACK:0100
2228 TSF:MSG:READ,0-0-1,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
2256 TSF:MSG:SEND,1-1-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=1,st=OK:2.1.1
2293 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
4313 TSF:MSG:SEND,1-1-0-0,s=1,c=0,t=0,pt=0,l=0,sg=0,ft=0,st=OK:
4331 MCO:REG:REQ
4370 !TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=NACK:2
6397 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=1,st=OK:2
6416 TSF:MSG:READ,0-0-1,s=255,c=3,t=27,pt=1,l=1,sg=0:1
6430 MCO:PIM:NODE REG=1
6436 MCO:BGN:INIT OK,TSP=1
6453 TSF:MSG:SEND,1-1-0-0,s=1,c=1,t=16,pt=1,l=1,sg=0,ft=0,st=OK:0
6469 MCO:SLP:MS=10000,SMS=0,I1=255,M1=255,I2=255,M2=255
6483 MCO:SLP:TPD
6490 MCO:SLP:WUP=-1

jkandasa · 1 Mar 2017, 20:46

@benya Thank you for the log and your patience. You can see from the gateway log, when you have enabled NODE_ID=AUTO, the gateway does not receive any request from the node. So it is problem between node and gateway. As gateway didn't receive and node id request MyController also do not know about it.

You have to check with MySensors guys. I request to go to the previous version of MySensors as well as the current version of the MySensors library. This issue might be with specific version too.

benya · 1 Mar 2017, 20:46

@jkandasa Turned out that EEPROM was not cleared properly with 0xFF

mpp · 14 May 2017, 09:47

@benya how did you see that it wasn't fully cleared, what script did you use to clear the EEPROM, are you using AUTO node id?

benya · 14 May 2017, 13:40

@mpp Guys in MySensors forum noticed I cleared EEPROM with zeros instead of 0xFF.

MySensor auto node ID

0

587

529

3.4k