Widget - Sensor custom buttons

jkandasa

@skywatch You have to release and click again and again. Also, handle the logic in your Arduino sketch.

skywatch

@jkandasa I have thought about that, but it is sooo tedious without a servant to do it for one! - So I will try programming the arduino node to automatically repeat the signal on seeing the command for the first time, then, when volume is as you like it I can send second command that will stop the loop counting up or down. I guess the same would apply to lighting controls that require a button to be held down to dim or brighten lights via IR?

jkandasa

@skywatch

I guess the same would apply to lighting controls that require a button to be held down to dim or brighten lights via IR?

This one may not be performed from the MyController side. Again this should be handled by Arduino sketch. I do not get any idea to implement this one with MyController

skywatch

@jkandasa

I do not get any idea to implement this one with MyController

I have an idea - what about a option to select whether or not to 'repeat' the command on button push (tick box) and then with a variable to define how often the 'message' should be sent per second.

This needs to be achieved with a way to detect a button push and button release.

But not something to take your time away from more important things

jkandasa

@skywatch Kindly create a request on GitHub page, I will work on this when I get time.

Thank you!

skywatch

@jkandasa Thanks - But I am the only one with use for this and it is better for your time to be spent on new MyController instead! I can manage with it how it is for a long time

jkandasa

@skywatch Thank you!

skywatch

Just an update to show that you guys are awesome.... Here is an image of the current setup...

And in case anyone else is stuck with this type of thing, here is the final fully working code.

/*
   Based on IRsendDemo Copyright 2009 Ken Shirriff
   http://arcfn.com
*/
#include <IRremote.h>
/*
   Yamaha Amp DSP 592
   Function Code  Len
*/
#define YPower 0x5EA1F807
/*  
 Optoma HD141X Projector
   Function Code  Len 
*/
#define Power_ON 0x4CB340BF
#define Power_OFF 0x4CB3748B
//
#define power_ON_macro 0x11111111
#define power_OFF_macro 0x22222222
#define CHILD_ID_FAN 0
#define CHILD_ID_HEATER 1
#define CHILD_ID_IR 2
#define RELAY_ON 0
#define RELAY_OFF 1
#define Fan_ON 0
#define Fan_OFF 1
#define Heater_pin 4
#define Fan_pin 5
// Enable debug prints
#define MY_DEBUG

// Enable and select radio type attached
#define MY_RADIO_NRF24
#define MY_RF24_PA_LEVEL   RF24_PA_LOW
#define MY_NODE_ID 61
#define MY_RF24_CHANNEL (97)
#define MY_PARENT_NODE_ID 0
#define MY_PARENT_NODE_IS_STATIC
//#define MY_REPEATER_FEATURE
//#define MY_SIGNING_ATSHA204
//#define MY_SIGNING_REQUEST_SIGNATURES
unsigned long last_heartbeat_time = 0;
unsigned long HEARTBEAT_TIME = 5 * 60000;
unsigned long code = 0x12345678;
IRsend irsend;
#include <Wire.h>
#include <MySensors.h>
MyMessage msgFan(CHILD_ID_FAN, V_STATUS);
MyMessage msgHeater(CHILD_ID_HEATER, V_STATUS);
MyMessage msgCode(CHILD_ID_IR, V_IR_SEND);

void presentation()
{
  // Send the sketch version information to the gateway
  sendSketchInfo("MYS-CinemaControl", "0.2");

  // Register all sensors to gw (they will be created as child devices)
  present(CHILD_ID_FAN, S_BINARY, "Cinema Fan");
  wait(100);
  present(CHILD_ID_HEATER, S_BINARY, "Cinema Heater");
  wait(100);
  present(CHILD_ID_IR, S_IR, "Cinema IR Send");
}

void setup()
{
  pinMode(Fan_pin, OUTPUT); //pin 5
  digitalWrite(Fan_pin, HIGH);
  pinMode(Heater_pin, OUTPUT); //pin4
  digitalWrite(Heater_pin, HIGH);
}

void loop() {
  if ((millis() - last_heartbeat_time) > HEARTBEAT_TIME) {
    sendHeartbeat();
    last_heartbeat_time = millis();
  }
} 

// process incoming message
void receive(const MyMessage &message) {
    if (message.type == V_IR_SEND){
    unsigned long code = strtoul(message.getString(),NULL,0);
  
  if (code == power_OFF_macro)
  {    
    irsend.sendNEC(Power_OFF, 32);
    delay(1500);
    irsend.sendNEC(YPower, 32);
    delay(1500);
    irsend.sendNEC(Power_OFF, 32);
  }
  if (code == Power_OFF)
  {
    irsend.sendNEC(Power_OFF, 32);
    delay(3000);
    irsend.sendNEC(Power_OFF, 32);
  }
  else if (code == power_ON_macro)
  {
    irsend.sendNEC(Power_ON, 32);
    delay(2000);
    irsend.sendNEC(YPower, 32);
  }
  else{
    irsend.sendNEC(code, 32);
   }
  }
    if (message.type == V_STATUS){
    digitalWrite(message.sensor+4, message.getBool()?RELAY_ON:RELAY_OFF);
  } 
}

I managed to get most of the ir code #define statements off the arduino and instead store them in the button code on the pi, which saves memory on the arduino for future expansion.

And here is the JSON code for the buttons, the hex codes will need to be changed to whatever you need...

[
 {
    "name": "Power ON Macro",
    "payload": "0x11111111",
    "btnType": "danger"
  },
 {
    "name": "Power OFF Macro",
    "payload": "0x22222222",
    "btnType": "danger"
  },
  {
    "name": "Amp Power",
    "payload": "0x5EA1F807"
  },
  {
    "name": "Amp Vol +",
    "payload": "0x5EA158A7"
  },
  {
    "name": "Amp Vol -",
    "payload": "0x5EA1D827"
  },
  {
    "name": "CD",
    "payload": "0x5EA1A857"
  },
  {
    "name": "Phono",
    "payload": "0x5EA128D7"
  },
  {
    "name": "Bluray",
    "payload": "0x5EA1E817"
  },
  {
    "name": "Amp Kodi",
    "payload": "0x5EA12AD5"
  },
 {
    "name": "Tape",
    "payload": "0x5EA118E7"
  },
 {
    "name": "Tuner",
    "payload": "0x5EA16897"
  },
 {
    "name": "V-Aux",
    "payload": "0x5EA1AA55"
  },
  {
    "name": "Time/Level +",
    "payload": "0x5EA14AB5"
  },
  {
    "name": "Time/Level -",
    "payload": "0x5EA14AB5"
  },
  {
    "name": "Effect",
    "payload": "0x5EA16A95"
  },
{
"name" : "2Ch/6Ch",
"payload": "0x5EA1E11E"
},
{
"name" : "Prog+",
"payload": "0x5EA11AE5"
},
{
"name" : "Prog -",
"payload": "0x5EA19A65"
},
{
"name" : "Enhanced",
"payload": "0x5EA1916E"
},
  {
    "name": "Data/Centre/Rear/Swfr",
    "payload": "0x5EA1619E"
  }
 
]

jkandasa

@skywatch Awesome!! great sharing. Thank you so much!

skywatch

@jkandasa I've just added the JSON settings for the amp, it was missing in the first post....Opps!

Thank you for making it all possible!

Widget - Sensor custom buttons

0

597

530

3.4k