• Categories
    • Recent
    • Tags
    • Popular
    • Register
    • Login

    Widget - Sensor custom buttons

    Scheduled Pinned Locked Moved Dashboard
    dashboardwidgetscustom buttons
    21 Posts 4 Posters 9.1k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • skywatchS Offline
      skywatch
      last edited by skywatch

      What I posted will not work, so here is the new code in full.....It compiles, but that doesn't mean it will do what I expect!

      My aim is to remove most of the hex code #define statements and have those hex values sent in the button payload of mysensors custom button JSON setup.
      This will save memory on the arduino.

      /*
         Based on IRsendDemo Copyright 2009 Ken Shirriff
         http://arcfn.com
      */
      #include <IRremote.h>
      /*
         Yamaha Amp DSP 592
         Function Code  Len
      */
      #define YTime/Level- 0x5EA1CA35
      #define YTime/Level+ 0x5EA14AB5
      #define YData/Centre 0x5EA1619E
      #define YTest 0x5EA1A15E
      #define YEffect 0x5EA16A95
      #define YProg- 0x5EA19A65
      #define YProg+ 0x5EA11AE5
      #define YProLogic 0x5EA111EE
      #define YEnhanced 0x5EA1916E
      #define YV-AUX 0x5EA1AA55
      #define YVCR 0x5EA1F00F
      #define YTV/DBS 0x5EA12AD5
      #define YDVD/LD 0x5EA1E817
      #define Y2CH/6CH 0x5EA1E11E
      #define YTAPE 0x5EA118E7
      #define YTUNER 0x5EA16897
      #define YCD 0x5EA1A857
      #define YPHONO 0x5EA128D7
      #define YSleep 0x5EA1EA15
      #define YPower 0x5EA1F807
      #define YVOL+ 0x5EA158A7
      #define YVOL- 0x5EA1D827
      /* 
         Optoma HD141X Projector
         Function Code  Len 
      */
      #define Power_ON 0x4CB340BF
      #define Power_OFF 0x4CB3748B
      #define USER1 0x4CB36C93
      #define USER2 0x4CB3A659
      #define USER3 0x4CB36699
      #define Brightness 0x4CB3827D
      #define Contrast 0x4CB342BD
      #define Mode 0x4CB3A05F
      #define Keystone 0x4CB3E01F
      #define Aspect 0x4CB326D9
      #define Optoma3D 0x4CB3916E
      #define Mute 0x4CB34AB5
      #define DB 0x4CB322DD
      #define OSleep 0x4CB3C639
      #define VOL+ 0x4CB38877
      #define VOL- 0x4CB328D7
      #define Source 0x4CB308F7
      #define Re-Sync 0x4CB348B7
      #define Enter 0x4CB3F00F
      #define Menu 0x4CB3708F
      #define HDMI1 0x4CB36897
      #define HDMI2 0x4CB30CF3
      //
      #define power_ON_macro 1111
      #define power_OFF_macro 2222
      #define CHILD_ID_FAN 0
      #define CHILD_ID_HEATER 1
      #define CHILD_ID_IR 2
      #define RELAY_ON 1
      #define RELAY_OFF 0
      #define Fan_ON 1
      #define Fan_OFF 0
      #define Heater_pin 4
      #define Fan_pin 5
      // Enable debug prints
      #define MY_DEBUG
      
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      #define MY_RF24_PA_LEVEL   RF24_PA_LOW
      #define MY_NODE_ID 61
      #define MY_RF24_CHANNEL (97)
      #define MY_PARENT_NODE_ID 0
      #define MY_PARENT_NODE_IS_STATIC
      //#define MY_REPEATER_FEATURE
      //#define MY_SIGNING_ATSHA204
      //#define MY_SIGNING_REQUEST_SIGNATURES
      unsigned long last_heartbeat_time = 0;
      unsigned long HEARTBEAT_TIME = 5 * 60000;
      unsigned long value = 000000000;
      IRsend irsend;
      #include <Wire.h>
      #include <MySensors.h>
      MyMessage msgFan(CHILD_ID_FAN, V_STATUS);
      MyMessage msgHeater(CHILD_ID_HEATER, V_STATUS);
      MyMessage msgCode(CHILD_ID_IR, V_IR_SEND);
      
      void presentation()
      {
        // Send the sketch version information to the gateway
        sendSketchInfo("MYS-CinemaControl", "0.1");
      
        // Register all sensors to gw (they will be created as child devices)
        present(CHILD_ID_FAN, S_BINARY, "Cinema Fan");
        wait(100);
        present(CHILD_ID_HEATER, S_BINARY, "Cinema Heater");
        wait(100);
        present(CHILD_ID_IR, S_IR, "Cinema IR Send");
      }
      
      void setup()
      {
        pinMode(Fan_pin, OUTPUT); //pin 5
        digitalWrite(Fan_pin, LOW);
        pinMode(Heater_pin, OUTPUT); //pin4
        digitalWrite(Heater_pin, LOW);
      }
      
      void loop() {
        if ((millis() - last_heartbeat_time) > HEARTBEAT_TIME) {
          sendHeartbeat();
          last_heartbeat_time = millis();
        }
      }
      
      // process incoming message
      void receive(const MyMessage &message) {
        if (message.type == V_IR_SEND)
        {
          unsigned long  code = message.getString();
          value = strtoul(code, NULL, 16);  
          Serial.print("code = ");
          Serial.print(code);
          Serial.print(" Value = ");
          Serial.println(value);
        
        }
        if (value == power_OFF_macro)
        {
          irsend.sendNEC(YPower, 32);
          delay(500);
          irsend.sendNEC(Power_OFF, 32);
          delay(1000);
          irsend.sendNEC(Power_OFF, 32);
        }
        else if (value == power_ON_macro)
        {
          irsend.sendNEC(YPower, 32);
          delay(500);
          irsend.sendNEC(Power_ON, 32);
        }
          else{
          irsend.sendNEC(value, 32);
          }
      if (message.type == V_STATUS){
          digitalWrite(message.sensor+4, message.getBool()?RELAY_ON:RELAY_OFF);
          } 
      }
      

      I'll be testing later today I hope! 🙂

      1 Reply Last reply Reply Quote 0
      • skywatchS Offline
        skywatch
        last edited by

        I have this working now, but how do I deal with buttons that repeat the code (volume)?

        jkandasaJ 1 Reply Last reply Reply Quote 0
        • jkandasaJ Offline
          jkandasa @skywatch
          last edited by

          @skywatch You have to release and click again and again. Also, handle the logic in your Arduino sketch.

          1 Reply Last reply Reply Quote 0
          • skywatchS Offline
            skywatch
            last edited by skywatch

            @jkandasa I have thought about that, but it is sooo tedious without a servant to do it for one! - So I will try programming the arduino node to automatically repeat the signal on seeing the command for the first time, then, when volume is as you like it I can send second command that will stop the loop counting up or down. I guess the same would apply to lighting controls that require a button to be held down to dim or brighten lights via IR?

            jkandasaJ 1 Reply Last reply Reply Quote 0
            • jkandasaJ Offline
              jkandasa @skywatch
              last edited by

              @skywatch

              I guess the same would apply to lighting controls that require a button to be held down to dim or brighten lights via IR?

              This one may not be performed from the MyController side. Again this should be handled by Arduino sketch. I do not get any idea to implement this one with MyController

              1 Reply Last reply Reply Quote 0
              • skywatchS Offline
                skywatch
                last edited by

                @jkandasa

                I do not get any idea to implement this one with MyController

                I have an idea - what about a option to select whether or not to 'repeat' the command on button push (tick box) and then with a variable to define how often the 'message' should be sent per second.

                This needs to be achieved with a way to detect a button push and button release.

                But not something to take your time away from more important things 😉

                jkandasaJ 1 Reply Last reply Reply Quote 1
                • jkandasaJ Offline
                  jkandasa @skywatch
                  last edited by

                  @skywatch Kindly create a request on GitHub page, I will work on this when I get time.

                  Thank you!

                  1 Reply Last reply Reply Quote 0
                  • skywatchS Offline
                    skywatch
                    last edited by

                    @jkandasa Thanks - But I am the only one with use for this and it is better for your time to be spent on new MyController instead! I can manage with it how it is for a long time 😉

                    jkandasaJ 1 Reply Last reply Reply Quote 1
                    • jkandasaJ Offline
                      jkandasa @skywatch
                      last edited by

                      @skywatch Thank you! 🙂

                      1 Reply Last reply Reply Quote 0
                      • skywatchS Offline
                        skywatch
                        last edited by skywatch

                        Just an update to show that you guys are awesome.... Here is an image of the current setup...

                        0_1533399149910_IR_Control_Screen.jpg

                        And in case anyone else is stuck with this type of thing, here is the final fully working code.

                        /*
                           Based on IRsendDemo Copyright 2009 Ken Shirriff
                           http://arcfn.com
                        */
                        #include <IRremote.h>
                        /*
                           Yamaha Amp DSP 592
                           Function Code  Len
                        */
                        #define YPower 0x5EA1F807
                        /*  
                         Optoma HD141X Projector
                           Function Code  Len 
                        */
                        #define Power_ON 0x4CB340BF
                        #define Power_OFF 0x4CB3748B
                        //
                        #define power_ON_macro 0x11111111
                        #define power_OFF_macro 0x22222222
                        #define CHILD_ID_FAN 0
                        #define CHILD_ID_HEATER 1
                        #define CHILD_ID_IR 2
                        #define RELAY_ON 0
                        #define RELAY_OFF 1
                        #define Fan_ON 0
                        #define Fan_OFF 1
                        #define Heater_pin 4
                        #define Fan_pin 5
                        // Enable debug prints
                        #define MY_DEBUG
                        
                        // Enable and select radio type attached
                        #define MY_RADIO_NRF24
                        #define MY_RF24_PA_LEVEL   RF24_PA_LOW
                        #define MY_NODE_ID 61
                        #define MY_RF24_CHANNEL (97)
                        #define MY_PARENT_NODE_ID 0
                        #define MY_PARENT_NODE_IS_STATIC
                        //#define MY_REPEATER_FEATURE
                        //#define MY_SIGNING_ATSHA204
                        //#define MY_SIGNING_REQUEST_SIGNATURES
                        unsigned long last_heartbeat_time = 0;
                        unsigned long HEARTBEAT_TIME = 5 * 60000;
                        unsigned long code = 0x12345678;
                        IRsend irsend;
                        #include <Wire.h>
                        #include <MySensors.h>
                        MyMessage msgFan(CHILD_ID_FAN, V_STATUS);
                        MyMessage msgHeater(CHILD_ID_HEATER, V_STATUS);
                        MyMessage msgCode(CHILD_ID_IR, V_IR_SEND);
                        
                        void presentation()
                        {
                          // Send the sketch version information to the gateway
                          sendSketchInfo("MYS-CinemaControl", "0.2");
                        
                          // Register all sensors to gw (they will be created as child devices)
                          present(CHILD_ID_FAN, S_BINARY, "Cinema Fan");
                          wait(100);
                          present(CHILD_ID_HEATER, S_BINARY, "Cinema Heater");
                          wait(100);
                          present(CHILD_ID_IR, S_IR, "Cinema IR Send");
                        }
                        
                        void setup()
                        {
                          pinMode(Fan_pin, OUTPUT); //pin 5
                          digitalWrite(Fan_pin, HIGH);
                          pinMode(Heater_pin, OUTPUT); //pin4
                          digitalWrite(Heater_pin, HIGH);
                        }
                        
                        void loop() {
                          if ((millis() - last_heartbeat_time) > HEARTBEAT_TIME) {
                            sendHeartbeat();
                            last_heartbeat_time = millis();
                          }
                        } 
                        
                        // process incoming message
                        void receive(const MyMessage &message) {
                            if (message.type == V_IR_SEND){
                            unsigned long code = strtoul(message.getString(),NULL,0);
                          
                          if (code == power_OFF_macro)
                          {    
                            irsend.sendNEC(Power_OFF, 32);
                            delay(1500);
                            irsend.sendNEC(YPower, 32);
                            delay(1500);
                            irsend.sendNEC(Power_OFF, 32);
                          }
                          if (code == Power_OFF)
                          {
                            irsend.sendNEC(Power_OFF, 32);
                            delay(3000);
                            irsend.sendNEC(Power_OFF, 32);
                          }
                          else if (code == power_ON_macro)
                          {
                            irsend.sendNEC(Power_ON, 32);
                            delay(2000);
                            irsend.sendNEC(YPower, 32);
                          }
                          else{
                            irsend.sendNEC(code, 32);
                           }
                          }
                            if (message.type == V_STATUS){
                            digitalWrite(message.sensor+4, message.getBool()?RELAY_ON:RELAY_OFF);
                          } 
                        }
                        

                        I managed to get most of the ir code #define statements off the arduino and instead store them in the button code on the pi, which saves memory on the arduino for future expansion.

                        And here is the JSON code for the buttons, the hex codes will need to be changed to whatever you need...

                        [
                         {
                            "name": "Power ON Macro",
                            "payload": "0x11111111",
                            "btnType": "danger"
                          },
                         {
                            "name": "Power OFF Macro",
                            "payload": "0x22222222",
                            "btnType": "danger"
                          },
                          {
                            "name": "Amp Power",
                            "payload": "0x5EA1F807"
                          },
                          {
                            "name": "Amp Vol +",
                            "payload": "0x5EA158A7"
                          },
                          {
                            "name": "Amp Vol -",
                            "payload": "0x5EA1D827"
                          },
                          {
                            "name": "CD",
                            "payload": "0x5EA1A857"
                          },
                          {
                            "name": "Phono",
                            "payload": "0x5EA128D7"
                          },
                          {
                            "name": "Bluray",
                            "payload": "0x5EA1E817"
                          },
                          {
                            "name": "Amp Kodi",
                            "payload": "0x5EA12AD5"
                          },
                         {
                            "name": "Tape",
                            "payload": "0x5EA118E7"
                          },
                         {
                            "name": "Tuner",
                            "payload": "0x5EA16897"
                          },
                         {
                            "name": "V-Aux",
                            "payload": "0x5EA1AA55"
                          },
                          {
                            "name": "Time/Level +",
                            "payload": "0x5EA14AB5"
                          },
                          {
                            "name": "Time/Level -",
                            "payload": "0x5EA14AB5"
                          },
                          {
                            "name": "Effect",
                            "payload": "0x5EA16A95"
                          },
                        {
                        "name" : "2Ch/6Ch",
                        "payload": "0x5EA1E11E"
                        },
                        {
                        "name" : "Prog+",
                        "payload": "0x5EA11AE5"
                        },
                        {
                        "name" : "Prog -",
                        "payload": "0x5EA19A65"
                        },
                        {
                        "name" : "Enhanced",
                        "payload": "0x5EA1916E"
                        },
                          {
                            "name": "Data/Centre/Rear/Swfr",
                            "payload": "0x5EA1619E"
                          }
                         
                        ]
                        
                        jkandasaJ 1 Reply Last reply Reply Quote 1
                        • jkandasaJ Offline
                          jkandasa @skywatch
                          last edited by

                          @skywatch Awesome!! great sharing. Thank you so much!

                          1 Reply Last reply Reply Quote 0
                          • skywatchS Offline
                            skywatch
                            last edited by

                            @jkandasa I've just added the JSON settings for the amp, it was missing in the first post....Opps! 😉

                            Thank you for making it all possible! 🙂

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post

                            0

                            Online

                            587

                            Users

                            529

                            Topics

                            3.4k

                            Posts
                            Copyright © 2015-2025 MyController.org | Contributors | Localization