@mostafa topic names are case sensitive. looks like on your Arduino sketch you have supplied in_Esp. This should be in_esp and the same for out_esp too.

thank you, they answered my question. and brought 3 more 🙂

@skywatch Emails working fine for me now 🙂

Hello again
I reinstalled the pi and the jdk and the pushbullet issue is gone now
Thanks again @jkandasa
Emmanuel

@petri Ah - OK, then I have no solution for you except a password manager afaik.

@Tomas looks like someone changed it.
I have updated in the login page too.

Username : demo
Password : demo

@lukash535 This is a great sharing!!

@aliasjim

MYController discovered a sensor called "SENSOR_BC", any idea what this is?

I guess this is related to the issue: https://github.com/mycontroller-org/mycontroller/issues/484, But still, I did not get any clue,

Is it possible to select a unit for a sensor "lightlevel(lux)" instead of (%)?

It is possible to change a unit, MyController does not have the unit lightlevel(lux). Can you create a ticket to add this?

I have one sensor with 2 "variable types", what does this mean and how can i remove one (one has no value)

Edit sensor and uncheck a variable, which you do not want. I hope it is reported by your sketch/node. So it may recreate again a later time.

I have digital sensors that are interrupt driven both when going low and when going high, but in mycontroller the sensor gets tripped and stays tripped (in dashboard, on the graph it does revert state back)

MyController graphs are updated every 30 seconds(default) once. You can refresh the page to see the changes. If not your sketch/node may not report the new state.

I love this software esspechially the FOTA part, no more running around with laptop and cables. Great work

Thank you 🙂

@aliasjim That's great!

Just for the record, I compiled all the bootloaders here:

https://github.com/guillebot/MYSensors-Bootloaders

all the channels, for 1, 8 and 16MHz.

@aliasjim I never tested with two kinds of a controller, May be possible. MQTT might fit for this requirement.
Other users might experience this setup.

🙂

Thank you @jkandasa !

@rmf69 Hi Welcome to MyController community! Have you tried with these examples?

Thanks, I tried running the script:

var myImports = new JavaImporter(java.io, java.lang, java.util, java.text); with(myImports) { var sVar = mcApi.uidTag().getByUid("temp-outside").getResource(); // Get sensor variable object with UidTag api var minMaxData = mcApi.metric().getSensorVariableMetricDouble(sVar, 0,1479833863195); //(sensor-variable-object, from-timestamp, to-timestamp) }

changing "temp-outside" to my own uidTag for my sensor. It worked but seemed to return a lot more information than needed, although I see that the value (distance) is there, but among a lot of unwanted data. Is there a way of extracting just time/distance from this? Here's a sample of what was returned....

{ "sVar": { "id": 7, "sensor": { "id": 8, "sensorId": "1", "type": "S_DISTANCE", "name": "", "lastSeen": 1509978854438, "node": { "id": 10, "eui": "1", "gatewayTable": { "id": 1, "enabled": true, "name": "Serial Gateway", "networkType": "MY_SENSORS", "state": "UP", "statusMessage": "Connected Successfully", "statusSince": 1509967019993, "type": "SERIAL", "properties": { "br": 115200, "rdr": "jSerialComm", "rf": 30, "txDelay": 0, "dr": "Auto", "pn": "/dev/ttyACM0" } }, "name": "Distance Sensor", "version": "1.0", "type": "S_ARDUINO_NODE", "libVersion": "2.1.1", "state": "UP", "lastSeen": 1509978855129, "properties": { "hbTx": 1509978436346 }, "registrationState": "REGISTERED", "smartSleepEnabled": false }, "variableTypes": [ "Distance" ], "idforVariables": 8 }, "variableType": "V_DISTANCE", "metricType": "DOUBLE", "timestamp": 1509978853779, "value": "151", "previousValue": "150", "unitType": "U_DISTANCE", "readOnly": false, "offset": 0, "priority": 100, "properties": { "marginRight": 20, "color": "#ff7f0e", "interpolate": "linear", "subType": "line", "marginBottom": 60, "useGlobal": true, "type": "lineChart", "marginTop": 5, "marginLeft": 65 }, "metricsGraph": { "id": 5, "metricName": "Distance", "type": "lineChart", "interpolate": "linear", "subType": "line", "color": "#ff7f0e" } }, "myImports": {}, "minMaxData": { "variable": { "id": 7, "sensor": { "id": 8, "sensorId": "1", "type": "S_DISTANCE", "name": "", "lastSeen": 1509978854438, "node": { "id": 10, "eui": "1", "gatewayTable": { "id": 1, "enabled": true, "name": "Serial Gateway", "networkType": "MY_SENSORS", "state": "UP", "statusMessage": "Connected Successfully", "statusSince": 1509967019993, "type": "SERIAL", "properties": { "br": 115200, "rdr": "jSerialComm", "rf": 30, "txDelay": 0, "dr": "Auto", "pn": "/dev/ttyACM0" } }, "name": "Distance Sensor", "version": "1.0", "type": "S_ARDUINO_NODE", "libVersion": "2.1.1", "state": "UP", "lastSeen": 1509978855129, "properties": { "hbTx": 1509978436346 }, "registrationState": "REGISTERED", "smartSleepEnabled": false }, "variableTypes": [ "Distance" ], "idforVariables": 8 }, "variableType": "V_DISTANCE", "metricType": "DOUBLE", "timestamp": 1509978853779, "value": "151", "previousValue": "150", "unitType": "U_DISTANCE", "readOnly": false, "offset": 0, "priority": 100, "properties": { "marginRight": 20, "color": "#ff7f0e", "interpolate": "linear", "subType": "line", "marginBottom": 60, "useGlobal": true, "type": "lineChart", "marginTop": 5, "marginLeft": 65 }, "metricsGraph": { "id": 5, "metricName": "Distance", "type": "lineChart", "interpolate": "linear", "subType": "line", "color": "#ff7f0e" } } } }

@jkandasa

I created a googledrive download script!, maybe it is usefull for you

#!/bin/sh if [ "$#" -ne 2 ] ; then clear echo "Usage ./get-googledrive doc-id filename" echo "Where the doc-id is the number presented on the share link in google drive" exit 1 fi echo echo '-----------------------------------------------------------------------' echo 'Getting doc-id : ' $1 echo 'Saving to filename : ' $2 echo '-----------------------------------------------------------------------' echo wget --no-check-certificate 'https://docs.google.com/uc?export=download&id='$1 -O $2

(not sure if the doc-id changes once you post a new version.....)