Svar: Howto make Mycontroller sd-card friendly? (Highly experimental!!)

Hi, I went a different route - I purchased a hardened SD-card with static wear levelling built-in.
That way I get a robust system and I do not have to meddle with all this ram based file system trickery.
It is a nice and easy alternative to those, who do not wish to get in with the command line.

Swissbit S-46u 8GB MicroSD

https://swissbit.com/data/view.php?q=S-46u/S-46u_fact_sheet.pdf

I got mine from Digikey.

I payed round about 32 EUR plus sales tax plus shipping.
I see it is currently priced at 35.23 EUR, and that there is 0 in stock:
Digi-Key item no 1052-1262-ND

Mouser also carries SD-cards form Swissbit and so does Farnell

Panasonic also makes some SD-cards with the similar features:
Industrial SDcard lineup

Svar: Howto make Mycontroller sd-card friendly? (Highly experimental!!)

Hi, I went a different route - I purchased a hardened SD-card with static wear levelling built-in.
That way I get a robust system and I do not have to meddle with all this ram based file system trickery.
It is a nice and easy alternative to those, who do not wish to get in with the command line.

Swissbit S-46u 8GB MicroSD

https://swissbit.com/data/view.php?q=S-46u/S-46u_fact_sheet.pdf

I got mine from Digikey.

Hi,

Just downloaded latest snapshot uploaded today of 0.0.3-final.
I am unable to login. The login screen just sits there, reporting no errors.
Can somebody confirm this?

Thanks.

Hello Jeeva,

I am having a spot of trouble uploading "for_translation_multi-locale_mc_locale_java_da_DK.properties" back onto https://www.transifex.com/mycontrollerorg/multi-locale/language/da_DK/

The message I get says:

Error uploading file: for_translation_multi-locale_mc_locale_java_da_DK.properties
We could not extract any string from the file uploaded

I had no trouble getting the other file back into the site

The file is as follows:

# AFTER_SUNRISE=Efter solopgang

# AFTER_SUNSET=Efter solnedgang

# ANY=Any

# AUTO=Auto

# AVERAGE=Gennemsnit

# BEFORE_SUNRISE=Før solopgang

# BEFORE_SUNSET=Før solnedgang

# BLOCKED=Blokeret

# BYE_HAVE_A_NICE_DAY=Farvel, ha' en god dag! Vi ses...

# C_INTERNAL=Intern

# C_PRESENTATION=Presentation

# C_REQ=Anmodning

# C_SET=Angiv

# C_STREAM=Strøm

# CORRUPTED_DATA=ØDELAGTE DATA

# CRON=Cron

# DEFAULT=Default

# ETHERNET=Ethernet

# I_BATTERY_LEVEL=Batteriniveau

# I_CHILDREN=Børn

# I_CONFIG=Config

# I_DEBUG=Debug

# I_DISCOVER=Opdag

# I_DISCOVER_RESPONSE=Opdagerespons

# I_FACTORY_RESET=Nulstil til fabriksindstillinger

# I_FIND_PARENT=Find forældre

# I_FIND_PARENT_RESPONSE=Find forældre-svar

# I_GATEWAY_READY=Gateway klar

# I_GET_NONCE='Get'-annoncering

# I_GET_NONCE_RESPONSE='Get'-annonceringsrespons

# I_HEARTBEAT=Hjerteslag

# I_HEARTBEAT_RESPONSE=Hjerteslagsrespons

# I_ID_REQUEST=Id-anmodning

# I_ID_RESPONSE=Id-respons

# I_INCLUSION_MODE=Inkluderingstilstand

# I_LOCKED=Låst

# I_LOG_MESSAGE=Logbogsbesked

# I_PING=Ping

# I_PONG=Pong

# I_PRESENTATION=Presentation

# I_PROPERTIES=Egenskaber

# I_REBOOT=Genstart

# I_REGISTRATION_REQUEST=Noter anmodning

# I_REGISTRATION_RESPONSE=Noter respons

# I_REQUEST_SIGNING=Anmod signatur

# I_RSSI=RSSI

# I_SKETCH_NAME=Sketch-navn

# I_SKETCH_VERSION=Sketch-version

# I_TIME=Tid

# I_VERSION=Version

# JSERIALCOMM=jserialcomm

# JSSC=jssc

# MAXIMUM=Maksimum

# MINIMUM=Minimum

# MQTT=MQTT

# NEW=Ny

# NORMAL=Normal

# PHANT_IO=Sparkfun [phant.io]

# PI4J=pi4j

# REGISTERED=Registeret

# S_AIR_QUALITY=Luftkvalitet

# S_ARDUINO_NODE=Node

# S_ARDUINO_REPEATER_NODE=Repeater-node

# S_BARO=Barometer

# S_BINARY=Binær

# S_COLOR_SENSOR=Farvesensor

# S_COVER=Låg

# S_CPU=CPU

# S_CUSTOM=Custom

# S_DIMMER=Dimmer

# S_DISK=Disk

# S_DISTANCE=Afstand

# S_DOOR=Dør

# S_DUST=Støv

# S_GAS=Gas

# S_GPS=GPS

# S_HEATER=Varmer

# S_HUM=Fugtighed

# S_HVAC=AirCon

# S_INFO=Information

# S_IR=IR

# S_LIGHT_LEVEL=Lysniveau

# S_LOCK=Lås

# S_MEMORY=Hukommelse

# S_MOISTURE=Fugt

# S_MOTION=Bevægelse

# S_MULTIMETER=Multimeter

# S_POWER=Effekt

# S_PWM=PWM

# S_RAIN=Regn

# S_RGB_LIGHT=RGB-lys

# S_RGBW_LIGHT=RGBW-lys

# S_SCENE_CONTROLLER=Scene-kontrol

# S_SMOKE=Røg

# S_SOUND=Lyd

# S_SPRINKLER=Sprinkler

# S_TEMP=Temperatur

# S_UV=UV

# S_VIBRATION=Vibration

# S_WATER=Vand

# S_WATER_LEAK=Vandlæk

# S_WATER_QUALITY=Vandkvalitet

# S_WEIGHT=Vægt

# S_WIND=Vind

# SERIAL=Seriel

# SIMPLE=Simpel

# ST_FIRMWARE_CONFIG_REQUEST=Firmware configurationsanmodning

# ST_FIRMWARE_CONFIG_RESPONSE=Firmware configurationsrespons

# ST_FIRMWARE_REQUEST=Firmware anmodning

# ST_FIRMWARE_RESPONSE=Firmware respons

# ST_IMAGE=Billede

# ST_SOUND=Lyd

# UNDEFINED=Undefineret

# V_ARMED=Armeret

# V_COUNT=Tæller

# V_CURRENT=Strøm

# V_CUSTOM=Custom

# V_DIRECTION=Retning

# V_DISTANCE=Afstand

# V_DOWN=Ned

# V_EC=EC

# V_FLOW=Strøm

# V_FORECAST=Fremskrivning

# V_FREE=Fri

# V_GUST=Vindstød

# V_HUM=Fugtighed

# V_HVAC_FLOW_MODE=AirCon operationstilstand (MODE)

# V_HVAC_FLOW_STATE=AirCon operationstilstand (STATE)

# V_HVAC_SETPOINT_COOL=AirCon setpunkt køling

# V_HVAC_SETPOINT_HEAT=AirCon setpunkt opvarmning

# V_HVAC_SPEED=AirCon hastighed

# V_ID=Id

# V_IMPEDANCE=Impedans

# V_IR_RECEIVE=IR modtag

# V_IR_RECORD=IR optag

# V_IR_SEND=IR send

# V_KWH=kWh

# V_LEVEL=Niveau

# V_LIGHT_LEVEL=Lysniveau

# V_LOCK_STATUS=Låsestatus

# V_ORP=ORP

# V_PERCENTAGE=Procent-andel

# V_PH=PH

# V_POSITION=Position

# V_POWER_FACTOR=Power-factor

# V_PRESSURE=Tryk

# V_RAIN=Regn

# V_RAINRATE=Regn-rate

# V_RATE=Rate

# V_RGB=RGB

# V_RGBW=RGBW

# V_SCENE_OFF=Scene SLUK

# V_SCENE_ON=Scene TÆND

# V_STATUS=Status

# V_STOP=Stop

# V_TEMP=Temperatur

# V_TEXT=Tekst

# V_TOTAL=Total

# V_TRIPPED=Affyret

# V_UNIT_PREFIX=Enhedsprefix

# V_UP=op

# V_USED=Brugt

# V_UV=UV

# V_VA=Volt-ampere

# V_VAR1=Variabel 1

# V_VAR2=Variabel 2

# V_VAR3=Variabel 3

# V_VAR4=Variabel 4

# V_VAR5=Variabel 5

# V_VAR=Volt-ampere reaktiv

# V_VOLTAGE=Spænding

# V_VOLUME=Volume

# V_WATT=Watt

# V_WEIGHT=Vægt

# V_WIND=Vind